Frequently Asked Questions Wolf Appliance Repair

Why is my Wolf stove/cooktop/range igniter not working?

• Grease buildup and food residue is a common cause for the Wolf stove, cooktop, range ignitor not working. A clog igniter can cause your appliance to stop the gas from firing. Clean any residual debris out of the burner holes with a toothpick, sewing needle, or compressed air.

Why does my Wolf stove/cooktop/range gas burner won't ignite?

• If your Wolf stove, cooktop, or range gas burner won't ignite, it usually results from a faulty igniter or heating element. If your gas stove or cooktop has stopped working, the problem is most likely with the gas line and will require professional repair to help you.

Why is my Wolf stove/cooktop/range heating element not working?

• Connections in the heating element can burn out and fail to provide power. If your Wolf stove, cooktop, or range heating element is not working, inspect the socket. If your unit needs replacing, be sure to have a service professional to help conduct your service. Turn to Wolf Appliance Repair to help!

What to do with my Wolf stove/cooktop/range knob problems?

• Most commonly, knobs on your appliances need to be replaced when the original markings are worn or scrubbed off. It is a common issue with the knobs, as years and years of cleaning can deteriorate the piece. The only real solution for Wolf stove, cooktop, or range knob problems is to replace them.

What to do when my Wolf stove/cooktop/range has electrical wiring issues?

• Common Wolf stove, cooktop, and range electrical wiring issues are a loose connection between the coils and the cooktop. The coils need to be removed for deep cleaning of an electric cooktop, and if they're not put back in place properly, they will not receive power. Be sure to check that your coils are correctly installed for proper operations.

Why does my Wolf stove/cooktop/range smells gas when turned on?

• It is normal for a Wolf stove, cooktop, or range to smell gas when turned on. It is caused by a small amount of gas that is released before it is ignited. The smell should go away after a few minutes. If the smell still goes on, get a technician to avoid any accidents.

Why is my Wolf stove/cooktop/range making noise?

• It is possible to hear a pulsing, buzzing, or clicking noise from the cooktop or range when used on a low-power setting and not on a higher power setting. It is due to the magnetic fields in use and is normal. Noises may vary when using different pots or pans. Get your unit checked whenever your Wolf stove, cooktop, or range is making noise.

What to do when my Wolf stove/cooktop/range unit doesn't heat up?

• When your Wolf stove, cooktop, or range unit doesn't heat up, the first item to check is the power supply. Make sure that the unit is securely plugged into the power source. Also, a clogged burner inhibits the flow of gas, which prevents the burner from igniting. The good news is, cleaning the burner is an effective solution.

What to do when my Wolf stove/cooktop/range gas leaks?

• If the gas odor can be smelled even when the pilot flame is burning or the igniter is plugged and operational, it can be a sign of one of the burners cannot be shut off completely. Examine burners, and turn off the gas supplement to the range. If you think your Wolf stove, cooktop, or range has gas leaks, contact a professional right away.

Why does my Wolf stove/cooktop/range pilot switch won't turn on?

• There are several possible reasons why your Wolf stove, cooktop, and range pilot switch won't turn on: an ongoing draft, a faulty thermostat, an accumulation of dirt, or an inefficient supply of gas or electricity. You could try resetting the unit if it lights up again.

Why is my Wolf oven heating element not working?

• If your Wolf oven heating elements are not working, there are a few things to look at. Igniter – Check to see if the igniter is working. Observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is defective and needs to be replaced.

What to do with my Wolf oven electrical wiring issues?

• A problem in your wiring can cause your oven to not get the power it needs to operate. If your Wolf oven has electrical wiring issues, be sure to let a certified technician handle the electrical repairs. An appliance technician will sort out your electrical wiring issues and get the electricals in place.

Why does my Wolf oven smells gas when turned on?

• Leaking gas can be a huge problem in the kitchen. It is usually caused by a small amount of gas that is released before it is ignited. The smell should go away after a few minutes. If not, it can cause accidents that could be unsafe for your home. If your Wolf oven smells gas when turned on, be sure to contact a technician right away. 

What to do when I have knob problems?

• Most commonly, knobs on your oven need to be replaced when the actual wear and tear are seen on them. It is a common issue with the plastic knobs, as years and years of cleaning. The only real solution for knob problems is to replace them.

Why does my Wolf oven self-cleaning feature won't work?

• If your Wolf oven self-cleaning feature doesn't work, you will want to check that all parts with the potential to be damaged by high heat. The wires and the thermal fuse are the most at risk, but the residual heat can damage even items such as the control board and thermostats of your oven.

Why is my Wolf oven making noise?

• Ovens often come with a fan that circulates the hot air around the oven. Over time, the fan would need lubrication and cleaning to function efficiently. If not, it will wear out from use which causes some squeaking and squealing sound, resulting in your Wolf oven making noise.

What is the best way to solve Wolf oven door hinge issues?

• A loose door hinge can decrease the efficiency of your oven as it will release heat from the gaps on the door. Realign your door hinges to straighten your door or get it replaced to solve your Wolf oven door hinge issues. Get a technician to help you replace your door hinges!

Why are my Wolf oven indicator lights not working?

• If your Wolf oven indicator lights are not working, you may be dealing with bad bulbs, a bad flasher relay, a faulty turn signal switch, or a bad wire or connector. First, check the bulbs to see if they are still in good shape or call a technician to fix them for you.

Why is my Wolf oven indoor light not working?

• When your Wolf oven indoor light is not working, check and ensure that there's the power to the oven. Maybe it came unplugged or a circuit shut off. You can also check if the problem is the switch located inside the oven door, which signals to turn on the light when you open the oven.

What to do when my Wolf oven gas leaks?

• Gas leaks are hazardous and should be dealt with safely and accordingly. If you suspect that there's a Wolf oven gas leak, contact an appliance repair company's emergency service hotline immediately. The company will dispatch a response team to survey your home, locate the source of the gas leak, and fix it.